Light, airy, and oh-so-effortless, our custom café curtains strike the perfect balance of simplicity and style. These unlined beauties let in just enough light while still providing privacy, making them perfect for kitchens, dining rooms, and bathrooms. Now available in our cotton and solid linen fabrics—plus five new sheers. Follow along for a step-by-step guide on how to find the perfect fit for your space.
Section 01: Choose Your Rod Height
Rod Placement:
Your rod height will determine your cafe curtain dimensions. Whether you're doing an inside mount or outside mount, we recommend mounting your rod at the halfway point of your window.
Section 02: Pick Your Construction
Choose Your Style:
Choose from 6 construction options for a look that best suits your style, and your windows. We offer rod pocket, rod pocket with header, double rod pocket, ring top, pinch pleat, and tailored pleat. Check out our Cafe Curtain Construction Guide for a breakdown of each look.
Section 03: Find Your Width
Width Guide:
Windows come in all shapes and sizes, which is why we have you covered with four different widths—25”, 50”, 75" or 100”. We recommend the following:
Section 04: Measure Your Length
Length Guide:
Cafe curtains should land just above the window sill. Keep in mind that hanging your panels with rings or rings with clips will change your measurements.
Depending on your desired curtain construction, you will need to measure one of three things: from the top of the rod to the window sill, from the bottom of rod to the window sill, or the distance between the rods.
To Find Your Panel Length:
- Rod Pocket with No Clips: Measure from the top of the rod to the window sill and add 0.5". Round down to the nearest inch.
- Rod Pocket with Clips: Measure from the top of the rod to the window sill and subtract 2". Round down to the nearest inch.
- Rod Pocket w/ Header: Measure from the top of the rod to the window sill and add 2". Round down to the nearest inch.
- Double Rod w/ Header: Measure the distance between the two rods and add 5". Round down to the nearest inch.
- Ring Top + Tailored Pleat with Clips: Measure from the top of the rod to the window sill and subtract 2". Round down to the nearest inch.
- Ring Top + Tailored Pleat with No Clips: Measure from the bottom of the rod to the window sill and subtract 0.5". Round down to the nearest inch.
- Pinch Pleat with Clips: Measure from the top of the rod to the window sill and subtract 2". Round down to the nearest inch.
- Pinch Pleat with No Clips: Measure from the ;bottom of the rod to the window sill and subtract 0.5". Round down to the nearest inch.
*If you add trim to your panels, we recommend subtracting 1” from the length measurement.
